2 1/4" (5.7 cm) Turbo Drive Socket Power Hub Anchor
2-1/4” Turbo Drive Anchors are rated at 10,000 ft-lbs installation torque and are used in areas with tough, dense soils where the power hub screw anchors cannot be installed. They consist of a one piece cast steel hub with welded on helix for increased torque and bending strength. The four flute leading tip is used to break through tough soils.
Install 2-1/2 with high strength installation tooling (7-5/8” bolt circle). Turbo Drive anchors are installed using a Kelly Bar adapter and Torque Tube to sleeve into the anchor and apply direct torque. They are commonly used with a 7’ anchor rod and single, double, or triple eyenut. Extensions for the Torque Tube and anchor rod are available when deeper installation depths are required.
Standard Turbo Drive (TD) anchors have a 3/8” thick helix. Heavy duty Turbo Drive (TDH) anchors have a ½” thick helix.
2-1/4” TURBO DRIVE SOCKET ANCHORS – 10,000 ft-lb INSTALLATION TORQUE – ½” THICK HELIX
| Catalog Number | Weight Lbs (kg) | Helix Diameter Inches (cm) | Tapped for Rod Size Inches ( cm) |
|---|---|---|---|
| TDH225-104 | 16.7 (7.6) | 10 (25.4) | 3/4 or 1 (1.9 or 2.5) |
| TDH225-112 | 21.6 (9.8) | 12 (30.5) | 5/8 (1.6) |
| TDH225-114 | 21.6 (9.8) | 12 (30.5) | 3/4 or 1 (1.9 or 2.5) |
| TDH225-134 | 27 (12.2) | 14 (35.6) | 3/4 or 1 (1.9 or 2.5) |
| TDH225-82 | 12.7 (5.8) | 8 (20.3) | 5/8 (1.6) |
| TDH225-84 | 12.7 (5.8) | 8 (20.3) | 3/4 or 1 (1.9 or 2.5) |
2-1/4” TURBO DRIVE SOCKET ANCHORS – 10,000 ft-lb INSTALLATION TORQUE – 3/8” THICK HELIX
| Catalog Number | Helix Diameter Inches (cm) | Tapped for Rod Size Inches ( cm) | Weight Lbs (kg) |
|---|---|---|---|
| TD225-104 | 10 (25.4) | 3/4 or 1 (1.9 or 2.5) | 14.2 (6.4) |
| TD225-114 | 12 (30.5) | 3/4 or 1 (1.9 or 2.5) | 17.9 (8.1) |
| TD225-134 | 14 (35.6) | 3/4 or 1 (1.9 or 2.5) | 22.4 (10.2) |
| TD225-82 | 8 (20.3) | 5/8 (1.6) | 11.2 (5.1) |
| TD225-84 | 8 (20.3) | 3/4 or 1 (1.9 or 2.5) | 11.2 (5.1) |