Rods Only
Power Installed Anchor Rods are used with power hub or turbo drive screw anchors. Select the appropriate rod diameter based on the ultimate load requirement and length.
Typically installations will use one 7’ rod. The rod threads must match the hub tapped hole. A 5/8” diameter rod is used with 5/8” power hub or turbo drive screw anchors designated for a 5/8” rod. The ¾” and 1” diameter rods have the same threads (1”-8 UNC). Hot Dip Galvanized per ASTM A123.
5/8” DIAMETER EXTENSION RODS – 16,000 lb. TENSILE STRENGTH
| Catalog Number | Length ft (m) | Weight Lbs (kg) |
|---|---|---|
| D62 | 7 (2.1) | 7.3 (3.3) |
| D6231/2 | 3.5 (1.1) | 3.6 (1.6) |
3/4” DIAMETER EXTENSION RODS – 23,000 lb. TENSILE STRENGTH
| Catalog Number | Length ft (m) | Weight Lbs (kg) |
|---|---|---|
| D75 | 7 (2.1) | 9.3 (4.2) |
| D7531/2 | 3.5 (1.1) | 5 (2.3) |
1” DIAMETER EXTENSION RODS – 36,000 lb. TENSILE STRENGTH
| Catalog Number | Length ft (m) | Weight Lbs (kg) |
|---|---|---|
| D100 | 7 (2.1) | 15.5 (7) |
| D10031/2 | 3.5 (1.1) | 9.6 (4.4) |