Tapered Guy, Steel

Full Round Guards are provided with U-bolt clamps at both ends.

The bottom fitting clamps directly to the guy rod. A slot near the base of the guard easily engages the tongue of the fitting. Then, the swivel type top clamp is installed without removing the nuts. Half Round Guards come with either a hook or clamp at the top.

The curved jaws of the heavy gauge steel hook tighten firmly on 1/4 to 9/16-inch strand as the guard is brought down into position. Two holes are available in the top clamp type, the lower of which is used on short sweep guys. Seven holes in the lower portion of both styles allow for proper positioning of the bottom clamp to the strand.

Material: Hot Dip Galvanized