Showing 25–36 of 62 results

    B2 - 2.5" Core Rod

    B2 Series are Standard MPS Braced Post designs. The lists below utilize Standard Molded H2 - 2.5" line posts, in conjunction with a standard S1-MXAL 25 kip suspension insulators.

    Description

    List of Materials:
    1. H2 - 2.5"" Molded Line Post
    2. S1 - MXAL 25 kip Suspension
    3. SYC-56 Socket Y-Clevis
    4. 28 kip Turnbuckle (6"" or 12"" Adjustable Range)
    5. ASH-55 Anchor Shackle

    0° Upsweep, with Corona Ring

    0° Upsweep, without Corona Ring

    *Height and Angle numbers represents Min - Max ranges

    1. MDCL = Max. Design Cantilever Load (Load Curves provided upon request)
    2. Electrical Data is derived from the assembly "Strike Distance", without corona rings for 161kV and below.
    3. All 230 kV Braced Post assemblies supplied with a corona ring (Electrical values include the corona ring)
    4. For Higher Strength or Custom designs, please complete the Braced Post Request Worksheet  in the PDF section of this page and return completed worksheet to MPS through your local MPS Sales Representative.
    5. Customized Designs include any dimensional changes, strength changes, hardware changes, end fitting changes, etc.
    6. CR = A Design Configuration that includes a corona ring at the specified Line Voltage

    12° Upsweep, with Corona Ring

    12° Upsweep, without Corona Ring

    *Height and Angle numbers represents Min - Max ranges

    1. MDCL = Max. Design Cantilever Load (Load Curves provided upon request)
    2. Electrical Data is derived from the assembly "Strike Distance", without corona rings for 161kV and below.
    3. All 230 kV Braced Post assemblies supplied with a corona ring (Electrical values include the corona ring)
    4. For Higher Strength or Custom designs, please complete the Braced Post Request Worksheet  in the PDF section of this page and return completed worksheet to MPS through your local MPS Sales Representative.
    5. Customized Designs include any dimensional changes, strength changes, hardware changes, end fitting changes, etc.
    6. CR = A Design Configuration that includes a corona ring at the specified Line Voltage